Jet J-2350 3HP 28 Direct Drive Drill Press (698087)

The Jet J-2350 3HP 28″ Direct Drive Drill Press (698087) is a heavy-duty drill press built for professional workshops and industrial applications. This machine boasts a powerful 3 HP motor that delivers ample power for drilling large holes in a variety of materials, including cast iron and mild steel. With a maximum drilling capacity of 1-7/8″ in cast iron and 1-3/4″ in mild steel, the J-2350 tackles even the most demanding drilling tasks.

KEY FEATURES AND BENEFITS:Precision and Accuracy You Can Rely On:The J-2350 is engineered for precise drilling with a tempered, ground spindle and internal taper mounted in precision bearings to minimize deflection.Offers nine-speed options (82-1524 RPM) for selecting the optimal speed for different materials and hole sizes.Versatility for Every Drilling Project:Large table (22″ x 19″) tilts 45 degrees left and right for drilling angled holes.T-slots machined into the base provide secure clamping for workpieces.Built to Last with User-Friendly Features:The spindle gearbox is internally lubricated in a continuous oil bath for smooth operation and extended life.Gears and shafts are made from hardened steel for durability.Easy-to-access speed and feed selectors located on one side of the drill head.Includes an automatic tool ejector, a manual quill lock for depth control, and a coolant system for cooling during extended drilling sessions.SPECIFICATIONS:Product: Jet J-2350 3HP 28″ Direct Drive Drill Press (698087)Motor: 3 HP, 230/460V, 3-phase (prewired for 230V)Spindle Taper: MT-4Drilling Capacity: Up to 1-7/8″ in cast iron, 1-3/4″ in mild steelSpindle Travel: 9″Table Size: 22″ x 19″Weight: 1810 lbsHOW TO USE:Step 1: Place the drill press on a stable, level surface and secure it using the provided mounting hardware.Step 2: Connect the machine to a suitable 230/460V three-phase power source, ensuring the voltage matches the prewired configuration.Step 3: Adjust the table to the desired height and tilt angle, then secure the workpiece using clamps in the T-slots for stability.Step 4: Select the appropriate spindle speed from the nine available options based on the material and drill bit size.Step 5: Use the manual quill lock to set the desired drilling depth, and engage the automatic tool ejector if needed.Step 6: Begin drilling, applying steady pressure, and using the coolant system to prevent overheating.Step 7: After drilling, turn off the machine, clean the work area, and check the lubrication system for maintenance.BENEFITS OF USING Jet J-2350 3HP 28″ Direct Drive Drill Press (698087):Delivers precise and accurate drilling for professional applications.Handles a variety of materials, including cast iron and mild steel.Offers versatile features like a tilting table and multiple speed options for different drilling tasks.Robust construction ensures long-lasting performance and reliability.User-friendly design with safety features and convenient controls.FEATURES:Certified Meehanite castings for stable and vibration-free operation.Powerful 3 HP motor for demanding drilling applications.Nine-speed options ranging from 82 to 1524 RPM for precise control.Tempered, ground spindle with internal taper for minimal deflection.Large tilting table (22″ x 19″) for versatile drilling angles.T-slots in the base for secure workpiece clamping.Heavy-duty quill and spindle construction for durability.Internally lubricated gearbox for smooth operation and extended lifespan.Hardened steel gears and shafts for increased durability.Easy-to-use speed and feed selectors for quick adjustments.Low voltage switch for enhanced safety during operation.Automatic tool ejector for convenience.Manual quill lock for precise depth control.Coolant system to cool bits and workpieces during extended drilling sessions.