Iwata LPH-300-LV 1.8mm HVLP Gravity Feed Spray Gun (3960)

The Iwata LPH-300-LV 1.8mm HVLP Gravity Feed Spray Gun (3960) is a professional-grade tool designed for efficient and high-quality paint application. This compact, center-post gravity feed spray gun offers full-size performance while maintaining a lighter weight, which helps reduce painter fatigue during extended use. Leveraging Iwata’s patented LV Technology and a unique tulip-inspired spray pattern, the LPH-300-LV is versatile for a wide array of painting applications, particularly excelling in automotive refinishing for primers and medium to high viscosity materials. Its advanced design ensures minimal overspray and high material transfer efficiency, leading to significant material savings and a cleaner work environment. Operating at extremely low air supply pressures and consuming very little air, this spray gun is an economical choice for any painting operation seeking consistent, professional results.

KEY FEATURES AND BENEFITS:High Volume Low Pressure (HVLP) Technology: Utilizes high air volume at low pressure for superior paint atomization, resulting in high transfer efficiency and substantial material savings by reducing overspray.Patented LV Technology with Split Nozzle: This specialized nozzle design significantly enhances material savings and contributes to the gun’s exceptional performance.Optimized Spray Pattern: Produces a consistent, uniform, and rounded pattern with very low overspray, ensuring a smooth and even finish across various surfaces.Efficient Air Consumption: Operates effectively at remarkably low air supply pressures, requiring only 14.5 psi (1.0 bar) at the nozzle and consuming approximately 8.5 CFM, making it energy-efficient.Lightweight and Ergonomic Design: The compact size and reduced weight are engineered to minimize painter fatigue, allowing for more comfortable and productive painting sessions.Finer Atomization Capability: While specifically equipped with a 1.8mm nozzle ideal for primers, its fine atomization is also suitable for wet-on-wet topcoats (though 1.4/1.6mm nozzles are often recommended for those applications).User-Friendly Controls: Features simple, intuitive control knobs that are easily operated by both right-handed and left-handed users.Ease of Maintenance: Designed with a conical seal nozzle to minimize wear parts and a high-quality surface for effortless cleaning, contributing to the gun’s longevity.SPECIFICATIONS:Nozzle Diameter: 1.8 mmRecommended Work Pressure: 18 psi (1.3 bar)Average Air Consumption: 8.5 CFMPattern Size: Up to 230 mmPart Number: 3960Series: LPH-300-LVApprovals: CE Marked, JAB QS Accreditation R005Included in Product: Typically includes the spray gun body with 1.8mm fluid nozzle, air cap, and needle set, a 600ml gravity cup, a cleaning brush, and a spanner.HOW TO USE:Preparation: Ensure your compressed air supply is clean, dry, and regulated to the recommended pressure (18 psi at the gun inlet). Mix your paint material according to the manufacturer’s specifications for spraying viscosity.Fill the Cup: Pour the prepared paint material into the gravity feed cup and secure the cup firmly onto the spray gun.Adjust Controls:Fluid Adjustment Knob: Turn this knob to control the amount of paint flow. A good starting point is usually fully open, then adjusted as needed.Pattern Adjustment Knob: Rotate this knob to adjust the width of the spray pattern, from a round spot to a wide fan.Air Adjustment Knob: Set the air pressure at the gun inlet to the recommended 18 psi (1.3 bar) and use the air adjustment knob on the gun for fine-tuning if necessary.Test Spray: Before applying to your actual workpiece, perform a test spray on a piece of scrap material to check the pattern, atomization, and fluid flow. Make any necessary adjustments.Application: Hold the spray gun perpendicular to the surface, maintaining a consistent distance (typically 6-8 inches). Apply paint in even, overlapping passes, moving at a steady speed. Release the trigger at the end of each pass.Cleaning: Immediately after use, thoroughly clean the spray gun. Disassemble the air cap, fluid nozzle, and needle. Use appropriate cleaning solvents to remove all paint residue from the gun body, internal passages, and components. Reassemble after cleaning.BENEFITS OF USING IWATA LPH-300-LV 1.8MM HVLP GRAVITY FEED SPRAY GUN (3960):Achieves professional-grade finishes with consistent material application.Significantly reduces paint consumption and waste due to high transfer efficiency.Minimizes airborne overspray, leading to a healthier work environment and less cleanup.Provides comfortable operation over extended periods, reducing hand and arm strain.Delivers excellent atomization for smooth, even coating layers.Operates efficiently with lower air compressor demands.Offers a versatile solution for applying a range of coating types.Simplifies cleaning and maintenance, extending the tool’s lifespan.FEATURES:Integrated compact design for improved handling and reduced operator strain.Advanced spray pattern shaping, inspired by a “tulip” form, for consistent coverage.Optimized for very low air pressure operation at the nozzle, enhancing material delivery.Engineered to consume minimal air volume for cost-effective performance.Designed with an easily grippable, ergonomic body for balanced use.Produces finely atomized particles for a smooth surface texture.Equipped with readily accessible control knobs for quick adjustments.Features a conical seal design for minimal component wear over time.Constructed with a smooth, easy-to-wipe-down exterior for quick cleaning.Supports compatibility with popular paint cup systems for flexible setup.