CTA Tools 3881 BMW Crankshaft Front Oil Seal Installer

CTA Tools 3881 BMW Crankshaft Front Oil Seal Installer – B37, B47, B48, B57, B58, N47 & N57

Replaces front crankshaft seal on BMW B37, B47, B48, B57, B58, N47 & N57 enginesComponents: 3881X01 – Press Sleeve, 3881X02 – Guide Tool, 3881X03 – Nut & 3881X04 – ScrewsCompare to BMW Factory Tool 118 800

Instructions:

1. Using the Guide tool (3881X02), clean off the contact rim and coat with fresh engine oil.Secure the Guide tool (3881X02) with the screws (3881X04) to the crankshaft.CAUTION! – Make sure all components are properly aligned prior to installation of seal.Carefully slide the crankshaft seal over the Guide tool (3881X02) in a straight and rotational movement until it is aligned with the crankcase.Position the Press Sleeve (3881X01) over the Guide tool (3881X02).Carefully hand-tighten the Nut (3881X03) to ensure the seal lines up correctly.After inspection of the seal and all components, begin tightening the Nut (3881X03) until the seal sits flush with the crankcase. CAUTION! – Do NOT overtighten and damage the seal.Seal is now properly installed. Carefully remove all 3881 components.