Goop 8Lb Coat-It Waterproof Epoxy Sealer & Protector Kit (5400060)

The Goop 8Lb Coat-It Waterproof Epoxy Sealer & Protector Kit (5400060) is an advanced two-part system engineered to provide exceptional waterproofing and robust protection for a wide range of surfaces. This high-performance epoxy coating creates an armor-like shield, making it ideal for the demanding environments of boat bottoms, truck beds, and various industrial or home applications. Its unique formulation sets it apart, integrating specialized components to enhance its protective capabilities. When applied, Coat-It forms a high-build, resilient layer that effectively seals against water ingress while offering significant resistance to abrasion and impact. The cured surface is versatile, allowing for sanding and painting, and can even be transformed into a non-skid surface by adding silica sand during application. Whether you need to safeguard a marine vessel, reinforce a truck bed, or protect concrete, this epoxy sealer provides a dependable and long-lasting solution, designed for both above and below the waterline use.

KEY FEATURES AND BENEFITS:Advanced Composite Formulation: Infused with ceramic beads for extreme abrasion resistance, graphite for improved slip and reduced friction, and Kevlar® fiber for outstanding toughness and strength, offering a multi-layered defense against wear.Superior Waterproofing: Creates a fully waterproof barrier that effectively seals surfaces and can even bridge small leaks or splits in a single application.High-Build Armor Coating: Develops a thick, durable layer that acts as an armor plating, protecting against physical damage and environmental stressors.Versatile Adhesion: Bonds strongly to a wide array of materials including aluminum, steel, fiberglass, wood, ferrocement, and concrete, making it suitable for diverse projects.Sandable and Paintable Finish: Once cured, the coating can be sanded smooth and painted over, allowing for customization and integration with existing finishes.Non-Skid Potential: Easily adaptable to create a non-skid surface by spreading medium to fine silica sand over the wet application.Wide Application Scope: Excellent for marine uses like boat hulls and decks, as well as truck beds, RVs, tanks, and animal troughs, providing protection both above and below the waterline.SPECIFICATIONS:Color: Gray (cures to a smooth, black coating)Mixing Ratio: 7 parts of Part A to 1 part of Part B (by weight)Pot Life (Working Time): Approximately 30-35 minutesCure Time: Approximately 10-12 hours at 70°F (21°C)Minimum Application Temperature: 65°F (18°C)Application Surface Temperature Range: 50°F (10°C) to 90°F (32°C)Coverage (8 lb kit): Approximately 80 sq ftHeat Deflection Temperature: 116°F (ASTM D648-264 psi)Bond Strength: 2,020 psi (mild steel to mild steel)Flexural Strength: 8,460 psiTensile Strength: 6,180 psiShelf Life: 1 yearStorage Temperature: 20°F (-7°C) to 100°F (38°C)HOW TO USE:Preparation: Ensure the application surface is clean, dry, and freshly sanded. It must be free of all contaminants such as grease, oil, dirt, loose paint, and rust for optimal bonding.Mixing: In a separate, clean container (not the original product containers), carefully measure out 7 parts of Part A to 1 part of Part B by weight. Mix the two components thoroughly and vigorously for several minutes until a uniform color and consistency are achieved. Proper mixing is critical for the product to cure correctly and achieve its stated properties.Application: Immediately after mixing, pour the entire mixed material onto your prepared working surface. Do not leave the mixed material in the mixing container, as this can significantly reduce working time due to exothermic reaction.Spreading: Apply the Goop Coat-It using a toothed trowel, squeegee, short bristle throw-away brush, or a foam roller. Spread evenly to achieve the desired thickness.Non-Skid (Optional): If a non-skid surface is desired, spread medium to fine silica sand over the wet Coat-It immediately after application.Curing: Allow the product to cure completely. At 70°F (21°C), the cure time is approximately 10-12 hours. Higher temperatures will reduce cure time, while thicker coats may cure faster.Finishing (Optional): For maximum ultraviolet protection, once Coat-It is thoroughly cured, you can lightly sand the surface and apply a good quality marine paint.Clean-up: Clean tools immediately after use with acetone or lacquer thinner.BENEFITS OF USING GOOP 8LB COAT-IT WATERPROOF EPOXY SEALER & PROTECTOR KIT (5400060):Provides enduring protection against physical wear and water damage, extending the lifespan of treated surfaces.Enhances surface performance with reduced friction and superior resistance to cuts and impacts.Offers a reliable solution for sealing existing leaks and preventing new ones, ensuring watertight integrity.Simplifies maintenance by providing a durable, easily cleaned, and customizable surface.Adapts to various projects due to its strong adhesion across multiple material types.Suitable for both underwater and above-waterline applications, providing comprehensive coverage for marine and other environments.Delivers a professional-grade finish that can be tailored with additional paint for aesthetic appeal and UV protection.FEATURES:Two-part epoxy formulation activates upon mixing for a strong bond.Transitions from gray to a black cured finish.Can be used with silica sand to produce a non-skid texture.Exceptional adhesion prevents flaking and peeling.Highly resistant to abrasion and impact damage.Retains stability when exposed to saltwater and various acids.Compatible with tools such as squeegees, rollers, and trowels.Capable of sealing fine cracks and gaps in one application.