Iwata LPH300-134LV 1.3mm Spray Gun w/ PCG4D-2 400mL Cup (3956)

The Iwata LPH300-134LV 1.3mm Spray Gun w/ PCG4D-2 400mL Cup (3956) is a compact, high-performance HVLP (High Volume Low Pressure) gravity-fed spray gun. Designed for efficiency and ease of use, this spray gun comes equipped with a PCG4D-2 400mL Aluminum Cup, making it ready for a wide array of finishing applications. Its sophisticated LV Technology combined with a unique “tulip inspired” spray pattern ensures fine atomization and consistent material distribution, leading to professional-grade results with less overspray. The lightweight and ergonomic design of the LPH300-LV significantly reduces painter fatigue, allowing for comfortable and extended periods of use. Constructed with stainless steel fluid passages, this spray gun is compatible with both solvent-borne and waterborne materials, offering versatility for different project requirements. Whether for automotive refinishing, woodwork, or industrial applications, the Iwata LPH300-134LV delivers reliable performance and a superior finish.

KEY FEATURES AND BENEFITS:HVLP Technology (LV Technology): Provides high transfer efficiency and reduced overspray, leading to material savings and a cleaner working environment.Compact Size and Lightweight Design: Minimizes painter fatigue during extended use, offering comfortable handling and maneuverability.”Tulip Inspired” Spray Pattern: Ensures a consistent, flat, and smooth fan pattern with precise droplet distribution for a uniform finish.Gravity Feed with 400mL Aluminum Cup: Allows for efficient material utilization, easy cleanup, and quick color changes.Versatile Material Compatibility: Stainless steel fluid passages make it suitable for both solvent-borne and waterborne coatings.Full-Size Performance: Delivers professional-grade atomization and finish quality typical of larger guns, despite its compact form.SPECIFICATIONS:Nozzle Size: 1.3mmAtomizing Air Pressure (at gun inlet): 15 PSIAir Pressure Inside Air Cap: 7.1 PSIAir Consumption: 7.1 CFMFluid Output: 120 ml/minPattern Width: 8.5 inchesWeight (Gun Only): 320gCup Model: PCG4D-2Cup Capacity: 400mLAir Cap Set: LV4Included in Purchase: Iwata LPH300-134LV Spray Gun, PCG4D-2 400mL Aluminum CupHOW TO USE:Preparation: Ensure your work area is clean and well-ventilated. Wear appropriate personal protective equipment, including a respirator, safety glasses, and gloves. Prepare your paint material according to the manufacturer’s recommendations for viscosity and mixing.Attach Cup: Securely attach the PCG4D-2 400mL aluminum cup to the spray gun.Fill Cup: Carefully pour the prepared paint material into the cup. Avoid overfilling.Connect Air Hose: Connect your air compressor hose to the air inlet on the spray gun. Ensure the air pressure is set to 15 PSI at the gun inlet.Adjust Controls: Adjust the fluid control knob and fan pattern control knob to your desired settings. A good starting point is often fully open for fluid and then adjusted to achieve the desired flow. For the fan, start with a moderate setting and adjust as needed to achieve your preferred pattern width.Test Spray: Before applying to your workpiece, perform a test spray on a piece of scrap material to check the pattern, atomization, and fluid flow. Make any necessary fine adjustments to the controls.Apply Material: Hold the gun perpendicular to the surface, maintaining a consistent distance. Begin spraying off the workpiece, move across, and release the trigger off the workpiece. Overlap each pass by approximately 50% for even coverage.Clean Up: Immediately after use, thoroughly clean the spray gun by flushing it with the appropriate cleaning solvent or water (depending on the material used). Disassemble the air cap and nozzle as needed for a more thorough cleaning to prevent material buildup.BENEFITS OF USING IWATA LPH300-134LV 1.3MM SPRAY GUN W/ PCG4D-2 400ML CUP (3956):Achieves exceptional finish quality with minimal effort due to precise atomization.Reduces material consumption and waste, leading to cost savings over time.Provides comfortable operation, reducing strain during long spraying sessions.Offers broad compatibility with various paint types, enhancing its utility across diverse projects.Streamlines the painting process with quick material changes and easy cleaning.Produces consistent and uniform coverage, minimizing the need for rework.FEATURES:Compact body size and reduced overall weight.Integrated air valve for precise air flow management.Ergonomically designed trigger for comfortable operation.Polished body finish for effortless cleaning.Stainless steel fluid needle and nozzle.Precise air cap engineered for consistent fan patterns.Dedicated fan pattern adjustment knob.Independent fluid flow control.