Iwata WS400 Supernova Evotech 1.4mm Spray Gun (5910)

The Iwata WS400 Supernova Evotech 1.4mm Spray Gun (5910) is a professional-grade tool meticulously engineered for superior clear coat application in automotive refinishing. Designed by the renowned Italian design house Pininfarina, this spray gun combines aesthetic appeal with cutting-edge performance. Its core strength lies in its ability to deliver a consistent droplet size during atomization, coupled with a flat, even spray pattern, which together effectively minimize common application issues and ensure a flawless finish. The WS400 Supernova Evotech is built with stainless steel fluid passages, making it compatible with a wide array of materials, including both solvent-borne and modern waterborne coatings. Compliance with EPA NESHAP 40 CFR, Part 63 Subpart 6H regulations underscores its commitment to efficiency and environmental responsibility, achieving higher transfer efficiency rates and contributing to significant material savings for professionals. This spray gun represents a blend of advanced technology, ergonomic design, and environmental consciousness, setting a high standard for finishing quality and operational efficiency.

KEY FEATURES AND BENEFITS:Consistent Atomization: Delivers a uniform droplet size, ensuring a smooth and even coating application.Flat, Even SuperNova Pattern: Reduces common application issues by providing a consistent and wide spray area.Patented LV Technology: Combines high fluid delivery for faster, smoother application and increased transfer efficiency, leading to material savings.EPA NESHAP Compliant: Meets environmental regulations, ensuring reduced overspray and efficient material transfer.Stainless Steel Fluid Passages: Suitable for use with both solvent-borne and waterborne materials, offering versatility.Optimized for Clear Coats: Recognized as a standard for achieving high-quality clear coat finishes.Fast Application Speed: Designed for efficient and rapid coating of surfaces.SPECIFICATIONS:Nozzle Diameter: 1.4 mmAtomizing PSI: 29 psiCFM: 12.57Fluid Output: 240 ml/minPattern Size: 370 mm (14.57 inches)Weight: 423 g (0.93 lbs)HOW TO USE:Preparation: Ensure your work area is clean, well-ventilated, and properly lit. Prepare the surface to be painted according to recommended automotive refinishing procedures (cleaning, sanding, priming, etc.).Mix Material: Thoroughly mix your clear coat or chosen material according to the manufacturer’s instructions. Ensure proper thinning and filtration to prevent clogs.Attach Cup: Securely attach a compatible cup (e.g., 3M PPS cup system with Adapter Type 43) to the spray gun. Pour the prepared material into the cup.Set Air Pressure: Connect an air hose to the gun. Adjust the air pressure regulator to 29 PSI (2 bar) at the gun’s inlet while the trigger is pulled to ensure accurate pressure.Adjust Fan and Fluid: Adjust the fan pattern control to achieve the desired width (the gun provides a 370mm pattern). Adjust the fluid control knob to regulate the material flow.Test Spray: Before applying to your final surface, perform a test spray on a practice panel to verify the spray pattern, atomization, and fluid output. Make any necessary fine adjustments.Apply Material: Hold the gun perpendicular to the surface, maintaining a consistent distance. Apply smooth, even passes, overlapping each pass by approximately 50%. Release the trigger at the end of each pass.Clean Up: Immediately after use, thoroughly clean the spray gun according to the material manufacturer’s recommendations. Disassemble necessary parts for complete cleaning to prevent material from drying inside.BENEFITS OF USING IWATA WS400 SUPERNOVA EVOTECH 1.4MM SPRAY GUN (5910):Achieves professional-grade clear coat finishes with a high level of precision.Enhances painting efficiency through faster application speeds and reduced passes.Minimizes material waste due to high transfer efficiency and reduced overspray.Provides consistent and predictable results, reducing rework and common painting errors.Offers compatibility with a wide range of modern automotive paint materials, including waterborne.Contributes to a safer working environment by adhering to environmental compliance standards.Delivers a comfortable spraying experience due to its ergonomic design and light weight.FEATURES:Designed with an advanced aesthetic by Pininfarina.Equipped with precision-engineered air cap technology for optimal atomization.Features a large, uniform spray pattern, often described as a “tulip” shape.Constructed with robust, corrosion-resistant stainless steel fluid passages.Gravity feed design ensures consistent material flow and simplifies cleaning.Lightweight body for extended use without fatigue.Compatible with standard 3M PPS cup systems via Adapter Type 43.Developed to perform optimally in various climate conditions.