Phoenix USA 25 Jumper Cable Kit w/ 4 Harness (JM254)

The Phoenix USA 25″ Jumper Cable Kit w/ 4″ Harness (JM254) is a robust and convenient solution designed for efficiently jump-starting vehicles, particularly in professional settings such as towing, recovery, and roadside service. This kit is engineered for reliable performance and ease of use, featuring heavy-duty components built to withstand demanding conditions. The long 25-foot cables provide ample reach, while the integrated quick-disconnect harness system streamlines the jump-starting process, saving valuable time and effort.

KEY FEATURES AND BENEFITS:The 25-foot cable length ensures accessibility to vehicles in various positions without the need for precise alignment.The inclusion of a 4-foot wiring harness, designed for permanent mounting to the service vehicle’s battery, features a quick-disconnect plug, eliminating the need to directly access the battery under the hood for each jump start.Constructed with heavy-duty 4-gauge copper wire, the cables ensure optimal power transfer, minimizing voltage drop and facilitating quicker starts.The kit is equipped with robust clamps, often rated at 400 or 500 Amps, providing a secure and reliable connection to battery terminals.The durable insulation of the cables offers resistance to common automotive fluids and maintains flexibility even in colder temperatures.The quick-disconnect system is protected by a dust cap when not in use, safeguarding it from the elements.SPECIFICATIONS:Jumper Cable Length: 25 feetHarness Length: 4 feet (may vary slightly in some listings)Cable Gauge: 4 AWG (American Wire Gauge) copper wireClamp Rating: Typically 400 or 500 Amps (verify specific rating)Harness Connection: Quick-disconnect plugCable Insulation: Heavy-duty, resistant to acid, oil, and chemicalsIncluded Components: 25-foot jumper cables with clamps, 4-foot wiring harness with quick-connect plug, dust cap for plug, mounting hardware for harness (may vary).HOW TO USE:Install the Harness: Permanently mount the 4-foot wiring harness to the service vehicle’s battery terminals. Ensure a secure and correct connection (positive to positive, negative to negative).Position the Service Vehicle: Park the service vehicle close enough to the disabled vehicle so that the 25-foot jumper cables can reach both batteries.Connect the Jumper Cables to the Harness: Remove the dust cap from the quick-disconnect plug on the service vehicle’s harness and firmly connect the 25-foot jumper cable assembly.Connect to the Disabled Vehicle’s Battery (Positive): Attach the red (+) clamp of the jumper cables to the positive (+) terminal of the disabled vehicle’s battery. Ensure a clean and secure connection.Connect to the Disabled Vehicle’s Battery (Negative): Attach the black (-) clamp of the jumper cables to a solid, unpainted metal part of the disabled vehicle’s frame or engine block, away from the battery and any fuel lines.Start the Service Vehicle: Start the engine of the service vehicle and let it run for a few minutes to allow some charge to transfer to the disabled vehicle’s battery.Attempt to Start the Disabled Vehicle: Try starting the engine of the disabled vehicle. If it doesn’t start immediately, wait a few more minutes and try again.Disconnect the Jumper Cables (Reverse Order): Once the disabled vehicle has started, carefully disconnect the black (-) clamp from the disabled vehicle. Then, disconnect the red (+) clamp from the disabled vehicle.Disconnect from the Harness: Disconnect the 25-foot jumper cable assembly from the quick-disconnect plug on the service vehicle’s harness and replace the dust cap.BENEFITS OF USING THE PHOENIX USA 25″ JUMPER CABLE KIT W/ 4″ HARNESS (JM254):Enhanced speed and convenience of jump-starting vehicles due to the quick-disconnect harness system, eliminating the need to locate and access the service vehicle’s battery under the hood.The long 25-foot reach provides flexibility in positioning the service vehicle, making connections easier in various scenarios.Heavy-duty 4-gauge copper cables ensure efficient and reliable power transfer, leading to quicker and more successful jump starts.Robust construction of the cables and clamps guarantees longevity and dependable performance in demanding environments.Added safety of connecting the negative clamp to the vehicle frame minimizes the risk of sparks near the battery.Organized storage of the long cables and the protected quick-disconnect plug contribute to a more professional and efficient operation.FEATURES:Extended 25-foot cable length: Facilitates versatile vehicle positioning.Pre-wired 4-foot harness: Offers permanent mounting and quick connection.Rapid quick-disconnect system: Ensures efficient jump-starting procedures.High-conductivity 4 AWG copper cables: Provide optimal power delivery.Heavy-duty clamps: Engineered for a secure and firm battery terminal grip.Durable cable insulation: Resistant to common automotive fluids and temperature variations.Protective dust cap: Shields the quick-disconnect plug from debris and moisture.Included mounting hardware: Enables straightforward installation of the harness.Designed for professional use: Ideal for towing, recovery, and roadside assistance applications.Facilitates jump-starting: Allows for use without direct access to the service vehicle’s battery.