Iwata LPH50-042G 0.4mm Spray Gun w/ PC61 130mL Cup (5272)

The Iwata LPH50-042G 0.4mm Spray Gun w/ PC61 130mL Cup (5272) is a miniature, high-performance HVLP (High Volume, Low Pressure) gravity-feed spray gun crafted for precision and efficiency in various applications. This compact and lightweight tool is designed to deliver superior atomization while maintaining low air consumption, making it an excellent choice for detailed work and small projects. The included side-mounted PC61 130mL stainless steel cup can rotate 360 degrees, offering operators the flexibility to spray at virtually any angle with ease. Whether for professional spot repairs, intricate graphic design, fine woodworking finishes, or detailed hobby touch-ups and shading, the LPH50-042G provides the control and quality needed for excellent results. Its robust construction, featuring stainless-steel components and solvent-resistant O-rings, ensures lasting performance and reliability.

KEY FEATURES AND BENEFITS:Precision HVLP Technology: Delivers high volume, low pressure spraying for excellent transfer efficiency, reducing material waste and minimizing overspray in the workspace.Superior Atomization: Produces extremely fine paint particles, resulting in a smooth, even, and high-quality finish, particularly beneficial for metallic or pearl paints.Versatile 130mL Cup: The PC61 130mL stainless steel gravity-feed cup is side-mounted and rotates 360 degrees, allowing for comfortable spraying in challenging positions and angles.Low Air Consumption: Operates efficiently at just 1.8 CFM at 13 PSI, making it suitable for smaller air compressors and reducing energy costs.Compact and Lightweight Design: Weighing approximately 220g, this gun is easy to handle and maneuver, reducing user fatigue during extended periods of detailed work.Adjustable Spray Pattern: Offers precise control over the fan pattern, from a small round dot to a 1.6-inch wide fan, enabling versatility for various painting needs.SPECIFICATIONS:Nozzle Diameter: 0.4 mmPattern Width: 1.6 inchesRecommended Air Pressure: 13 PSIAir Consumption: 1.8 CFMFluid Output: 8 ml/minCup Capacity: 130 mLAir/Fluid Connection: G1/4Weight (Gun Only): 220 gFeed Type: Gravity FeedMaterials: Stainless-steel nozzle, paint passage, heat-tempered needle, solvent-resistant O-ringsIncluded in the box: Iwata LPH50-042G Spray Gun, PC61 130mL CupHOW TO USE:Prepare the Surface: Ensure the surface to be sprayed is clean, dry, and properly prepared (e.g., sanded, primed, masked) for optimal paint adhesion.Mix Your Material: Prepare your paint or coating according to the manufacturer’s recommendations for viscosity. Strain the material to remove any impurities that could clog the gun.Fill the Cup: Pour the prepared material into the PC61 130mL gravity-feed cup. Ensure the cup is securely attached to the spray gun.Connect Air Supply: Attach an air hose with the appropriate fitting (G1/4) to the spray gun’s air inlet. Set your air compressor regulator to the recommended 13 PSI.Adjust the Gun: Adjust the fluid control knob (typically at the back of the gun) and the fan pattern control knob (usually on the side) to achieve your desired spray pattern and material flow. Test the spray on a piece of scrap material to fine-tune settings.Apply Material: Hold the gun perpendicular to the surface at a consistent distance (typically 4–6 inches). Begin spraying just off the edge of your target, trigger the gun fully, and move across the surface in smooth, even passes, overlapping each pass by about 50%. Release the trigger at the end of each pass.Clean Thoroughly: Immediately after use, empty any remaining material from the cup. Disassemble the cup and clean it with appropriate solvent or water. Spray clean solvent or water through the gun until it runs clear. Use a cleaning brush to clean the nozzle and needle, and ensure all passages are clear to prevent clogging for future use.BENEFITS OF USING IWATA LPH50-042G 0.4MM SPRAY GUN W/ PC61 130ML CUP (5272):Reduced material waste: High transfer efficiency means more paint goes onto the surface and less into the air, saving on expensive materials.Improved air quality: Lower overspray contributes to a healthier work environment by reducing airborne paint particles.Precise application: Allows for very accurate and controlled painting, which is critical for blending and detailed artistic work.Versatile operation: The rotating cup and lightweight design enable comfortable use in varied positions and tight spaces.Consistent finish: Produces uniform particle distribution for a smooth, blemish-free final appearance.Ease of maintenance: Designed for straightforward cleaning, ensuring the longevity and optimal performance of the tool.FEATURES:Engineered atomization for ultra-fine droplet formation.Durable stainless-steel nozzle and needle with solvent-resistant seals.Customizable spray pattern via adjustable fan control knob.Precision fluid control for accurate material delivery.Integrated air valve for on-gun air pressure adjustment.Rotatable side-mounted cup ensures optimal material flow and visibility.Ergonomic design minimizes operator fatigue during long tasks.Ultra-lightweight build for enhanced maneuverability and control.