Iwata LPH80-104G 1.0 mm Gravity Feed – Mini Spray Gun Only (4925)

Iwata LPH80-104G 1.0 mm Gravity Feed – Mini Spray Gun Only (4925) is engineered for delivering exceptional finish quality in small to medium-sized applications. Its precision-machined 1.0 mm fluid nozzle and E4 air cap work in harmony to produce fine atomization, ensuring a smooth, even, and consistent coating with minimal material waste. This gun’s design prioritizes efficiency, operating at low air pressure and consuming minimal air, which makes it an excellent choice for workshops with smaller compressors or for mobile repair professionals. Its lightweight and compact form factor enhance maneuverability, allowing for comfortable use in tight spaces and reducing user fatigue during extended operation. Whether you’re working on automotive spot repairs, intricate woodworking, or custom graphics, the LPH80-104G provides the control and performance needed for professional-grade results.

KEY FEATURES AND BENEFITS:High precision 1.0 mm fluid nozzle combined with E4 air cap for fine atomizationOperates efficiently at low air pressure to reduce material wasteLightweight and compact for easy maneuverability and reduced fatigueSuitable for automotive spot repairs, woodworking, and graphic finishesMinimal air consumption ideal for smaller compressors or mobile useAdjustable spray pattern for versatile application from tight spots to broad fansConsistent, smooth finish with excellent control over coating applicationSPECIFICATIONS:Nozzle Size: 1.0 mmAir Cap Model: E4Technology: HVLP (High Volume Low Pressure)Recommended Inlet Pressure: 13-14 PSIAir Consumption: 1.8-2.1 CFMFluid Output: 60 ml/minWeight: 250g (0.45 lbs)Spray Pattern Range: 1.6 inches (round) to 5.5 inches (fan)HOW TO USE:Preparation: Ensure your work area is clean, well-ventilated, and adequately lit. Prepare the surface to be painted by cleaning, sanding, and masking as necessary.Mix Material: Prepare your paint or coating material according to the manufacturer’s recommendations. Ensure it is properly thinned and free of contaminants. Strain the material if needed.Fill Cup: Attach a compatible gravity-feed cup (e.g., 70ml, 150ml, or 250ml) to the spray gun. Pour the prepared material into the cup, ensuring it is not overfilled.Connect Air Hose: Connect your air compressor hose to the spray gun’s air inlet. Ensure the air pressure regulator on your compressor is set to the recommended operating pressure (13-14 PSI for this gun).Adjust Controls:Fluid Knob: Turn the fluid adjustment knob at the back of the gun to control the amount of material flowing out.Pattern Knob: Adjust the pattern control knob (usually on the side) to change the spray pattern from a round spot to a wide fan.Air Valve: Use the air adjustment valve at the base of the handle (if present, or control air pressure at the regulator) to fine-tune airflow.Test Spray: Before spraying your actual workpiece, perform a test spray on a piece of scrap material to verify the spray pattern, fluid output, and atomization. Adjust settings as needed.Apply Material: Hold the spray gun at a consistent distance (typically 6-8 inches) from the surface. Use smooth, even strokes, overlapping each pass by about 50%. Release the trigger at the end of each stroke.Clean Up: Immediately after use, disconnect the air supply and empty any remaining material from the cup. Clean the spray gun thoroughly using appropriate cleaning solvents. Spray clean solvent through the gun until it runs clear to prevent material from drying inside.BENEFITS OF USING IWATA LPH80-104G 1.0 MM GRAVITY FEED – MINI SPRAY GUN ONLY (4925):Significantly reduces overspray for material savings and cleaner workspaceFine atomization produces smooth, uniform finishes requiring less sandingLow air consumption allows use with smaller compressorsCompact and lightweight design reduces fatigue and improves controlAdjustable spray patterns adapt to a variety of project needsVersatile tool suitable for professional and hobbyist applicationsFEATURES:Precision-machined internal components for reliable performanceErgonomic design for comfortable handling and reduced fatigueCompatible with various gravity-feed cup sizes for added flexibilityEfficient material transfer to minimize waste and enhance coverageQuick-release air cap simplifies cleaning and maintenanceFine atomization ensures smooth, even coating applicationsSuitable for a wide range of automotive, wood, and graphic finishesConstructed from durable, high-quality materials for extended tool life