Iwata RG3L-12 0.6mm Round Pattern Spray Gun Only (2809)

The Iwata RG3L-12 0.6mm Round Pattern Spray Gun Only (2809) is a highly respected gravity-feed air-spray gun engineered for exceptional precision and control in detailed finishing. Manufactured by Anest Iwata, a leader in spray equipment from Japan, this model is specifically designed to produce a fine, uniform round pattern, making it indispensable for intricate applications where accuracy is paramount. Its advanced atomization technology ensures a smooth and consistent finish, elevating the quality of your work whether in automotive touch-ups, intricate artwork, or fine woodworking.

KEY FEATURES AND BENEFITS:Precise Round Pattern Control: The RG3L-12 is optimized for a consistent and highly controllable round spray pattern, allowing for accurate blending, shading, and detailed application. This precision is crucial for achieving seamless transitions and intricate designs.Remarkable Atomization: Utilizing advanced technology, this spray gun produces exceptionally fine atomization, breaking down liquid coatings into a delicate mist for a smooth, high-quality finish with minimal overspray.Ultra-Low Air Consumption: Requiring only 1.1 CFM at 36 PSI, the RG3L-12 is remarkably air-efficient. This reduces demands on your air compressor, allowing for extended use and compatibility with smaller, less powerful air sources, making it a cost-effective and versatile tool.Compact and Lightweight Design: Weighing approximately 200g (0.44 lbs), its ergonomic and lightweight build minimizes operator fatigue during prolonged use, enhancing comfort and maneuverability, especially in tight spaces or when working on delicate items.360° Rotatable Side-Mounted Gravity Cup (Gun Only): While the cup is sold separately, the design accommodates a side-mounted gravity cup that can rotate a full 360 degrees. This provides unparalleled flexibility, allowing the operator to spray comfortably at a wide variety of angles, including horizontal, vertical, and overhead positions, adapting to any project’s demands.SPECIFICATIONS:Model: RG3L-12Part Number: 2809Nozzle Size: 0.6mmSpray Pattern: Round Pattern OnlyFeed Type: Gravity FeedAir Consumption: 1.1 CFMRecommended Air Pressure: 36 PSIFluid Output: 35 ml/minPattern Width: 35 mmWeight: 200gWetted Parts Material: Brass, Stainless SteelGun Body Material: Aluminum Die-CastOrigin: Made in JapanIncluded in Product: Iwata RG3L-12 0.6mm Spray Gun Only (cup sold separately)HOW TO USE:Preparation: Ensure your work area is well-ventilated and clean. Prepare your desired coating material by straining it to remove any particles and ensure it is mixed to the manufacturer’s recommended consistency for spraying.Attach Cup (if applicable): Securely attach a compatible side-mounted gravity cup (e.g., Iwata PC-61 or PC-5) to the gun body. Fill the cup with your prepared coating material, ensuring not to overfill to prevent spills.Connect Air Hose: Connect a clean air hose from your air compressor to the air inlet fitting on the bottom of the spray gun. Ensure your air compressor is set to the recommended operating pressure of 36 PSI.Adjust Controls: If available, adjust the fluid control knob (typically at the back of the gun) and the air control knob (often near the air inlet) to your desired settings. For initial use, start with conservative settings and adjust as needed.Test Spray: Before applying to your actual workpiece, perform a test spray on a piece of scrap material. Observe the spray pattern and atomization. Make fine adjustments to the fluid and air controls until you achieve the desired results.Application: Hold the gun perpendicular to the surface, maintaining a consistent distance. Move the gun smoothly across the surface at an even speed, overlapping each pass slightly to ensure uniform coverage. Utilize the 360° cup rotation to adapt to various angles and contours of your workpiece.Cleaning: Immediately after use, thoroughly clean the spray gun. Disassemble the air cap and nozzle, and clean all components with an appropriate cleaning solvent. Flush the gun body and fluid passages until clear. Regular and thorough cleaning is essential for maintaining optimal performance and longevity.BENEFITS OF USING IWATA RG3L-12 0.6MM ROUND PATTERN SPRAY GUN ONLY (2809):Achieves exceptionally smooth, professional-grade finishes for small-scale projects.Minimizes material waste due to precise atomization and controlled spray pattern.Reduces operational costs by requiring very low air pressure and consumption.Enhances user comfort and reduces strain during extended periods of intricate work.Provides adaptability for spraying in challenging or unconventional positions due to its flexible cup mounting.Delivers consistent, repeatable results critical for high-quality blending and shading.Built with durable materials for long-term reliability and performance.FEATURES:Gravity-feed fluid delivery system for efficient material flow.Specialized air cap design for fine round pattern atomization.Lightweight aluminum die-cast body for ease of handling.Stainless steel fluid needle and nozzle for corrosion resistance.Adjustable fluid output control for precise material flow.Air adjustment valve for controlling air pressure at the gun.Quick-disconnect air inlet for easy hose attachment.Ergonomic grip designed for comfortable operation.