KnKut 10KK14BS 10 Piece Carbide Burr Set with 1/4 Shanks

KnKut 10KK14BS 10 Piece Carbide Burr Set with 1/4″ Shanks

This KnKut 10 Piece Burr Set with 1/4 Inch Shanks features Double Cut Carbide Burrs which allows for rapid stock removal in harder materials. The addition of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds.

*For maximum control and to prevent whipping and chatter, make sure to insert the shank as far into the chuck as possible.

*Avoid excessive pressure which slows the spindle speed and damages the cutting edge. Do not operate the burr when dull. The high heat and pressure will cause excessive chipping and possible braze failure.

Solid Carbide HeadIndustry Standard Forms: SA, SB, SC, SE, SF, SG, SM, SL, SH, SK, SJ, SN, SNEAll KnKut Carbide Burrs are Double Cut