Power Probe PP3EZREDCS Power Probe 3EZ Clamshell – Red

Power Probe PP3EZREDCS Power Probe 3EZ Clamshell – Red

Easy Learning – Teaches a new user how to use the functions in the tool.Easy Diagnostics – Guides a user through simple tests such as Battery Testing, Charging System Testing, Fuse Testing, and Voltage Checks.Simply scan the QR Code with your Smart Device, which will link to a video to guide the user to perform these tests.The easy to read LCD display – Provides easy to see readings with a simple navigation menu to get to what you need fast.Upside Down? No Problem!With a new flip screen feature, you can see screen readings while holding the tool upside down.Safety First.The 8 amp thermal circuit breaker provides protection while powering up components, relays or circuits while still allowing inrush current for larger draw components.It’s Menu Driven. The PP3EZ has a menu driven screen that makes navigating a breeze for easier diagnosing of electrical issues.This is an essential electrical tool.The PP3EZ is an all-in-one tool with DC Voltmeter, MIN, MAX, and Peak to Peak mode, along with audio signal capability (AC Threshold).
Storage temperature/humidity: -20 to 70 °C, 70% RH max
Operating temperature/humidity: -10 to 50 °C, 70%RH max
Pollution degree:2Voltage & Polarity testingContinuity testingActivating components out of the vehicle’s electricalsystemActivating electrical components in the VehicleActivating electrical components with groundTesting trailer lights and connectionsChecking for bad ground contactsRed/Green Indicator & Audio ToneDC 0 to +70V +1 DigitP-P 0 to +70V
The frequency responsefor tone pass through10Hz to 10kHz
PP Display15 Hz Square Wave35 Hz Sine Wave
Power Probe Mode – Continuity to groundFirst level – Display is enabled less than 20 KΩSecond level – Green LED is enabled less than approx. 600Ω
– & +Peak Detector ResponseSingle event capture less than 200ms pulse widthRepetitive events less than 1ms pulse width
Peak to Peak Mode0 to + 70 + 1 Digit4Hz to over 500kHz Square Wave input4Hz to over 250kHz Sine Wave inputThreshold for PPAC/Audible passthrough
OverVolt Warning!!
If the probe tip connects to a voltage greater than +70 Volts the display will show an “Over Volt” warning. Remove the probe tip immediately to prevent internaldamage to the tool.
Over Load Warning
If the probe is connected to a battery with a voltage greater than 34 VDC the display will show an “Over Load” warning.

Circuit Breaker
8 amp thermal response – Manual reset

Typical Response
8 amps 10amps 15amps25ampsShort Circuit
No Trip 20min 6 sec.2 sec.0.3 sec.

The PP3EZCS Kit includes:

Power Probe 3EZProbe TipBattery Clip-Set